吸附劑式常溫、干燥機

◆物品優勢 Product features

※兼有動態平衡相一致的排氣重壓和露點

1.吸附物塔之的高度與外徑經實驗報告的結果高精度計算公式，塔床障礙小，以確保了壓縮成有害氣體空氣干燥劑5秒的沾染日子，滿足了生產設備氣的露點讓。

2.30％的粗糙劑空間，用做征收土地賠償粗糙劑的自然美衰老，為了保證粗糙。

3.玄幻擴散作用器，確保安全生產氣體平均根據常溫、干燥劑層，徹底消除溝流情況。

※回收利用氣量損耗費乘以14％

1.優良的機筒設計制作，導出100％的溶解形成，店鋪的形成采用增長機體復蘇技能一階段的機體復蘇技能氣室溫，提生設備的解吸技能，不使機體復蘇技能更齊全。

2.烘干和降解使用返向對流傳熱規劃，濕空氣質量流下來干的離心分離劑有效期果較好的。降解氣出來含濕量操縱在亞飽合感覺，使消音器器及排氣閥門車道無結水之慮。

3.可通過空氣干燥機的操作短路電流所需調整重復氣水量，提高認識重復熱空氣重復穩定可靠，重復的壓力低至臨介。

※干澀劑使用的平均壽命

1.適合使用的機筒規格尺寸，使氣體可以通過烘干劑層的風速和周期做到好的程序，徹底更好地發揮烘干劑的能力。

2.恰當的系統軟件設備，在暖濕暖濕氣流進入機筒前，經除油治理實時處理暖濕暖濕氣流中內殘油物與重弄臟物，杜絕空氣干燥劑層受弄臟。

※機器設備采用了了獨特高茶葉品質直流電動及氣動式閥和是真的嗎的全網絡可和程序編寫序把握器，電腦畫質團結，智能間隔表示雙塔生產，循環往復時期場所可編，出廠的重設10min。調節閥使用時間超過50萬次行為。

※筒身壁有作冷鍍鋅鐵防生銹工作，10年不生銹腐蝕現象。

※健身動作準確的、使用性能動態平衡、運作簡易，裝置不用基礎上。

※Bend it out on the same has the stable pressure and dew point

1. The height and diameter adsorption tower by the experimental results calculated precisely, tower, ensure the small resistance bed compressed gas desiccant 5 seconds contact time, meet the requirements of the finished product angry dew point.

2.30% of the surplus, desiccant used to compensate for the natural aging, ensure desiccant dry.

3. Large diffuser, ensure uniform through the desiccant air layer, eliminate channel flow phenomenon.

※Bend the gas loss less than 14% renewable

1. Excellent barrel design, save 100% of the adsorption quantity of heat, storage quantity of heat is used to increase the regeneration stage again angry temperature, improve equipment desorption ability, make renewable more thoroughly.

2. Dry and regeneration of the reverse convection scheme, wet air through the dry when the adsorbent best effect. Getting angry export moisture content control in the saturated state, the muffler and exhaust passage without concentrations of condensation.

3. According to the operation of the dryer load demand adjust dosage, ensure again angry for stability, regeneration renewable air pressure low to critical.

※Bend desiccant long service life

1. The right of barrel size, make the gas through the desiccant flow velocity and time of layer be the best, give full play to the desiccant performance.

2. The reasonable system configuration, in the air into the barrel, except by the efficient before oil processing timely removal in the air in content and heavy oil pollutant, avoid desiccant layer contamination.

※The equipment adopts bend novel high quality and pneumatic valve electric and advanced and reliable full electronic programmable controller, friendly interface, automatic continuous display of the twin towers, working cycle, the programmable factory set 10 min. The valve life for 500000 times action.

※Bend the cylinder body wall be cold galvanizing antirust processing, 10 years don't rust.

※Bend action, stable performance, accurate, easy operation and installation with no need of foundation.

◆一般科技參數表 Main technical parameters